Gaslow Wave Bluetooth Gas Level Gauge Kit

The NEW Gaslow WAVE system enables you to control your self-refillable gas cylinder contents through your smartphone with the addition of our accurate Bluetooth Kit.
Our designated App for both iOS and Android will inform you about your gas level, usage and when you are running low of gas.
User settings allow you to set your own alarm level depending on how early you want notification.
Please note that the Gaslow Wave Bluetooth Kit cannot be used in conjunction with the Gaslow Remote Solenoid.

Frequently asked questions

Why do I have to register and be logged in for the app to display data at all?
The data is not stored locally on your phone, but centrally on a cloud server. This allows you to change your device without losing your data. To be able to allocate your data, we need user accounts.

What is the GPS data needed for?
The “DIMES” product range also includes a solution for stationary containers (heating) – to be able to offer corresponding services (e.g. automatic filling), the data must be evaluated (customer, location, fill level). Furthermore we plan to include all available LPG filling stations in a later version of the app. This will enable you to find the nearest petrol station directly in the app.

Why does my tracking service have to be activated?
The providers Apple and Android do not allow Bluetooth connection if tracking services are disabled.

What data is collected and what happens to it?
The data will be sent exclusively to (ROTAREX S.A.) the manufactures of the Multivalve. You can find further information at Click Here

I am asked for a PIN when configuring the app. Where is it located?
The PIN is located on the sticker on the back of the module.

Can I measure the level with the Gaslow Wave without an internet connection?
The current fill level can also be read without an Internet connection. Only the charts/graphs are set up via the cloud server.

The app is showing me a wrong fill level
If the app is showing REFILL (empty) although you knowingly have a full gas bottle, or showing FULL when it is empty.  (or generally get a wrong display), this may be due to the special feature of the “first alignment” of the sensor. As this is a mechanical level sensor which transmits the fill level from the valve to the display unit via a magnetic connection, under special circumstances it is possible that the two magnets “jam” together. Only when the float is moved the magnets are correctly aligned (by gas extraction and/or by vibrations during travel). Alternatively, the magnet in the sensor can be influenced with an external magnet so that it is manually released. For this reason the app should be set up and tested during installation before the sensor is screwed together (in this case the sensor can be adjusted again manually using an external magnet. IF YOU HAVE INSTALLED THE WAVE AND THE READING IS SHOWING INCORRECT, BY REMOVING THE RECEIVER UNIT FROM THE BOTTLE AND MANUALLY SLOWLY SPINNING IT AROUND IN YOUR HAND, YOU CAN CORRECTLY CALIBRATE THE GAUGE TO SHOW YOU THE CORRECT READING WHILST REFRESHING THE APP. ONCE THIS IS COMPLETE, YOU CAN REINSTALL THE RECEIVER UNIT BACK INTO THE BOTTLE. 

Please note that the Trend Chart is not used to monitor your gas level. Use the reading from the TOP of the APP under the Motorhome.

The plug can no longer be removed from the sensor
The plug connection is designed according to protection class IP54, which requires a good and secure connection. To release the connection, it is best to use a small (slotted) screwdriver, with which you press in the latch directly above the plug connection to be able to pull the plug upwards.

Can several devices be connected simultaneously?
The DIMES transmitter unit can only establish one connection at a time, but they can connect several devices (just not in parallel). This situation is due to the Bluetooth Low Energy (BLE) standard.

How often is the data updated?
The default frequency is 12 hours, under ANDROID (Apple unfortunately does not support this functionality) you can set the cycle yourself (Menu – Global Settings – Advanced Settings). Please enter the value in minutes (e.g. 120 for an automatic update every 2 hours). Please also consider that a shorter transmission frequency also means higher energy consumption (battery life).

Contents of Gaslow Wave Kit
Hall sensor 0.5 – 4.5 V (RRD Remote Readout Dial)
WAVE transmitter box with 1 m cable length (without batteries)
Holder for WAVE Box with velcro fastener
Allen Key with 2 screws for replacement

The Gaslow wave will only work with Gaslow cylinders and AluGas cylinders that incorporate the Multi-Valve, see picture below.

Any questions you have please do not hesitate to contact Gaslow on 01509 377377

Don’t forget to visit our FAQ technical & Products section CLICK HERE